BRV Bonetti Rubinetterie Valduggia S.r.l.
MODVLVS
Regolare e distribuire energia pulita
M2 FIX3 CS - DN20
2-Way pump unit with recycling thermic valve for solid fuel boilers. High efficiency circulating pumps. Start opening temperature 60°C, 45°C or 55°C.
Product file
687 MIX
Very small size adjustment kit for distribution box, with motorizable 3-way rotating mixing valve. High efficiency circulating pump.
Product file
T10H
Thermostatic control head with liquid gas sensor, compatible M30x1,5. EN 215 approved, TELL certification.
Product file
Solar Kit 3
Solar-boiler thermostatic connection kit with adjustable diverting temperature. Control of the user temperature adjustable from 35°C up to 60°C with antiscald protection.
Product file
CLIMA L - DN25
2-way pump unit with 3-way mixing valve and electronic circulating pump. Built-in Clima L 24VDC climatic controller for complex installations
Product file
1610
Full bore 2-way zone ball valve, with bidirectional actuator with quick connection. Dimensions from 1/2" DN15 to 1"1/4 DN32.
Product file
DomvS Circ 1
Hot domestic water recycling kit for storage tanks with coils. 35÷60°C. Available version provided circulating pump with temperature sensor and timer. Available Kvs: 2,5 and 4,0.
Product file
Logico
Multifunctional compact hydraulic module for the management of a direct circuit, a mixed circuit and the production of domestic hot water (DHW)
Product file
RCD2
Remote control of the heating system for AHC40 and CMP25-2 climatic controllers. Automatic pairing with climatic controller.
Product file
ModvFresh 1
Pump unit to deliver fresh HDW with thermostatic controller, flow rate up to 20 l/min or 40 l/min. Possibility to make a parallel connection of up to 5 units for power up to 500 kW.
Product file
Solo 2
Pump unit for stratified loading to supply the heat produced by a solar thermal installation. Equipped with pre-programmed controller and Class A circulating pumps.
Product file
789R
High performance thermostatic diverting valve. Adjustable temperature from 38°C up to 54°C. Kvs 2,5 towards the gate, 3,5 towards the gate 2.
Product file
DomvS Clima
Control unit for manifolds of heating and cooling radiant panels up to 200 m2. Fixed point thermostatic mixer or motorized rotary mixing valve. LCD room control unit.
Product file
514
Ball valve with filter in hot forged brass. To fill the installation. The filter can be easily removed, to be cleaned and inspected. Nickel plated.
Product file
M2 MIX3 FIX - DN25
2-Way pump unit with 3-way mixing valve with electronic servomotor for the constant temperature. Heating and Cooling.
Product file
1055
3-way motorizable rotating mixing valve for heating, cooling and solar thermal installations. Working as mixer or diverter. Kvs from 2,5 up to 25.
Product file
MCCS 745
Anti-condensing recycling and distribution pump unit with thermostatic control of the return temperature to the solid fuel heating sources.
Product file
1066
4-way motorizable rotating mixing valve for heating, cooling and solar thermal installations. Kvs from 2,5 up to 25.
Product file
DN25 Pump units
| The ModvlvS DN25 series is a complete range that meets all the installation needs with specific models: middle and low temperature heating systems, need of energy metering, cooling systems; everything with the possibility of a management control by means of climatic controllers even built-in the pump unit. The DN25 pump units can be connected to heating systems with powers up to 50 kW, with a very low energy consumption assured by high efficiency synchronous circulating pumps. The connections to the distribution headers are made in 1” or 1”1/4 female thread. Moreover the pump units of M3 version are equipped with a by-pass balancing valve that allows an accurate regulation of the differential pressure of the loop. The range is supplemented by: distributors, connections, security units, mixers and servomotors. |
 |
 |
Heat source: Gas boiler. Supply from heat source: Unmixed pump unit M2 DN25; Δt 20 K. Distribution: - Hydraulic switcher HW 60/125-04 DN25; - Heating distributor HV 60/125-SG2 DN25 for 2 pump units with security unit SG 50 and expansion vessel. Heating users: - Medium power radiator line, Δt 20 K: unmixed pump unit M2 DN25; - High power radiator line, Δt 20 K: mixed pump unit M2 MIX3 DN25. |
 |
Heat source: Solid fuel boiler. Buffer tank loading from the boiler: Version 1: employment of anti-condensing pump unit MCCS DN25; Δt 20 K; Version 2: employment of anti-condensing recycling pump unit M2 FIX3 CS DN25; Δt 20 K; Distribution: Heating distributor HV 60/125 DN25 for 3 pump units. Heating users: - Low power radiator line, Δt 20 K: unmixed pump unit M2 DN25; - Low power radiator line, Δt 20 K: mixed pump unit M2 MIX3 DN25; - Low power under floor heating line, Δt 8 K: fixed temperature pump unit M2 FIX3 DN25. |
 |
Heat source: Solid fuel boiler. Buffer tank loading from the boiler: anti-condensing pump unit M2 MIX3 CS DN25; Δt 20 K. Distribution: heating distributor HV 70/125 DN25 for 4 pump units. Heating users: - Low power radiator line, Δt 20 K: unmixed pump unit M2 DN25; - Low power radiator line, Δt 20 K: mixed pump unit M2 MIX3 DN25; - Low power under floor heating line, Δt 8 K: fixed temperature pump unit M2 FIX3 DN25; - Medium power under floor heating line, Δt 15 K: mixed pump unit M2 MIX33 DN25. |
 |
Heat source: Gas boiler. Supply from heat source: Unmixed pump unit M2 DN32; Δt 20 K. Distribution: - Hydraulic switcher HW 60/125-05 DN25; - Heating distributor HV 70/125 DN25 for 5 pump units. HDW tank loading: Unmixed pump unit M2 DN25; Δt 20 K. Heating users: - Low power radiator line, Δt 20 K: mixed pump unit M2 MIX3 DN25; - Low power under floor heating line, Δt 8 K: fixed temperature pump unit M2 FIX3 DN25; - Low power under floor heating line, Δt 15 K: mixed pump unit M2 MIX33 DN25; - High power radiator line, Δt 20 K: mixed pump unit with electronic control for constant temperature M2 MIX3 FIX DN32. |
Attention: the representations are to be considered just as an indication and they have no completeness pretension.